Need help?Do you have a question about the Telrad Avanti 3015 and is the answer not in the manual?
Details the physical buttons and layout of the Avanti 3000 and 3015 telephone sets.
Explanation of buttons that users can customize for functions like speed dial or memory.
Description of pre-programmed buttons such as HOLD, FEATURE, PICK UP, and TRANSFER/CONFERENCE.
Instructions on how to select and program different ring tones for incoming calls.
How to enable or disable the telephone's microphone during a call.
Using the telephone speaker to allow others to hear the conversation.
Procedures for making ringing and non-ringing calls to internal extensions.
Using Call Back for busy extensions and how to cancel the feature.
How to interrupt an ongoing internal call when the line is busy.
Making announcements to page zones and speaking directly with a page initiator.
Methods for answering ringing, flashing, or intercom calls.
Managing a second incoming call while already engaged in a conversation.
Steps to switch back to a previously held call after answering a second incoming call.
How to access an outside line to make external phone calls.
Procedures for redialing the last number and saving frequently dialed numbers.
Setting up the system to automatically redial a busy number.
How to queue for an available outside line when all lines are busy.
Temporarily changing extension restrictions to make specific calls.
How to cancel a request to wait for an available outside line.
How to access special services provided by a CENTREX or PBX exchange.
Instructions for placing calls on exclusive or inclusive hold.
How to retrieve a call that has been placed on hold.
How to retrieve a call that was transferred but not yet answered.
Steps to set up a conference call with multiple participants.
How to answer calls ringing or on hold at another extension or pickup group.
How to send a simple message to another extension when no answer is received.
Notification of new messages, calling the sender, and deleting messages.
Setting the phone to not ring and forward incoming calls.
Turning off the DND feature to resume normal ringing.
Selecting and programming predefined messages for callers when DND is active.
How to remove a programmed DND message.
Setting up call forwarding based on situation: always, busy, or no answer.
Disabling previously programmed call forwarding settings.
How to stop receiving calls forwarded from another telephone set.
Using speed dial buttons and memories for faster dialing of numbers.
How to program speed dial codes or buttons for storing telephone numbers.
How to use programmed memory buttons for one-touch dialing.
Steps to program memory buttons for extensions or feature access codes.
How to set an alarm to ring at a specific time.
How to cancel an alarm setting or stop an active alarm ring.
How to prevent unauthorized outside calls by locking the telephone.
How to disable the telephone lock feature.
How to answer a visitor at the door via the intercom.
How to operate the electric door latch to grant entry.
How to activate phone features by dialing specific access codes.
To Next Page
General
