EN -9-
• Use the adjustable front legs to make sure your appliance is level and stable. You can
adjust the legs by turning them in either direction. This must be done before placing
food in the appliance.
• Clean the appliance thoroughly before use (see Cleaning and Maintenance).
• Before using your fridge freezer, wipe all parts with a solution of warm water and a
teaspoon of sodium bicarbonate. Then, rinse with clean water and dry. Return all parts
to the fridge freezer after cleaning.
If your refrigerator includes a fan condenser
- The bottom cabinet cover is the plastic
The condenser of your fridge is located at
the bottom of the cabinet. As a result, the
fittings which control the distance between the
refrigerator and the wall behind your fridge are
located on the cover of the bottom of the cabinet.
You can move your fridge toward the back wall
until this point.
Plastic for distance setting
- The bottom cabinet cover is the metal
The condenser of your fridge is placed at the
bottom of cabinet. As a result of that, assemble
the spacer by fixing it to holes on the cover bottom
panel and turn 90° that’s shown below figure for
arranging the distance between the refrigerator
and the back wall at where you place the fridge.
You can move the fridge towards the back wall
until that point.
The distance between the appliance and back wall
must be a minimum of 75 mm.
Plastic for distance setting
Before Using your Fridge
• When using your fridge for the first time, or after transportation, keep it in
an upright position for at least 3 hours before plugging into the mains. This
allows efficient operation and prevents damage to the compressor.
• Your fridge may have a smell when it is operated for the first time. This is normal and
the smell will fade away when your fridge starts to cool.
To Next Page