42
2. Press [] or [] to browse through your
Callers List.
If you read a new entry it is assumed to be seen
and the Unseen Counter decrements by one.
3. Press [
to exit or [OK] to dial the number.
Moving a Caller Entry:
You can transfer an entry from the Callers List into
the Directory the Screening List or any of the
Quick-Dial memories. This allows you to keep the
entry for as long as you like.
1 Press [CALLERS]
2. Press [
] or [] to go to the entry you want.
3. Press [ENTER]
The display shows the message MOVE TO ?
4. Press [DIRECTORY], [SCREENING], [M1],
[M2], [M3], or [M4].
If the chosen destination is full the move
request is cancelled. Choose another destination
or exit the Callers List and delete any unwanted
entries from the destination list.
5. Modify the name and number (if necessary)
and assign a melody.
The caller entry is deleted from the Callers List
and saved in the specified destination. The
display returns to the next entry.
OK
DIAL
SCREENING
USING CALLER DISPLAY
ENTER
NOTEPAD
CALLERS
DIRECTORY
a200ug.p65 3/7/01, 11:11 AM42
To Next Page
Loading...
