the down position.
When the call is connected the handset automatically enables Handsfree
(speaker-phone) mode.
The Volume can be adjusted to Loud, Medium, Low or Off
In any state, push the Switch key down to return the phone to standby mode.
Switch Dialling is still activated when the keypad is locked.
At the end of the call close the Switch Key to terminate the call.
4.2 MAKE AND RECEIVE CALLS
Enter the phone number using the number keys and press the Green key to
dial. If you enter a wrong digit use the Clear Key to delete. Long press the Clear
key to delete all the characters.
Hold the * key (long press) to add a dial prefix * for international dialling, ‘W’ to
enter the Wait symbol which will hold dialling until the next key or the Pause
symbol ‘P’ which adds a 3 second delay into the dialled number.
Press the Green key to Answer an incoming call.
Press the Red key to Reject an incoming call.
Long press on the 0 number key to enable Handsfree or Speakerphone mode
Press the Volume keys to adjust volume during the call.
Press the Red key to hang-up (End) the call.
If you have set speed dial numbers long press the numeric keys (0, 2, 4 to 9) to
dial the corresponding contact. If you have not set any Speed dial numbers you
can long press on keys 0, 2, 4 to 9 to program a Speed dial number. (1 is