Telstra SP817BB - Programing Your Most Used Numbers; One-Touch Memory Programming; Two-Touch Memory Programming

14
PROGRAMING YOUR MOST
USED NUMBERS
PROGRAMING THE ONE-TOUCH MEMORY BUTTONS (M1, M2, M3)
Lift the handset or press SPKR, press STORE and dial the phone number,
then press the desired memory location M1 to M3, then replace the handset
or press SPKR.
DIALLING FROM ONE-TOUCH MEMORY BUTTONS
Lift the handset, wait for the dial tone and press M1 to M3.
PROGRAMING THE TWO-TOUCH MEMORY BUTTONS
Lift the handset or press SPKR, press STORE and dial the phone number, then
press MEM and press the desired memory location 1 to 0, then replace the
handset or press SPKR.
Hang up after programing each memory button. Use the REDIAL button to
enter 1.5 sec pause if required
Maximum of 30 digits (including Pauses and Recall) can be stored in each
memory location
Hang up after programing each memory button. Use the REDIAL button to
enter 1.5 sec pause if required
Maximum of 30 digits (including Pauses and Recall) can be stored in each
memory location