15
WI-FI
CONNECTIVITY
1. Connecting to a Wireless Network (Wi-Fi)
There are three ways to connect your phone to Wi-Fi:
A: Manually connect to an available wireless network
B: Wi-Fi Protected Setup (WPS)
C: Manually add and connect to a new wireless network
Before attempting to configure and connect to a wireless network / Wi-Fi,
you must ensure your Telstra T48G IP Phone is:
1) Connected to a mains power supply; and
2) NO Ethernet cable should be connected (either for wired Ethernet or
Power over Ethernet).
The PC Port does not support wireless operations; it is only supported in
a wired operation (i.e. when the phone is connected to the network via
an Ethernet cable).
To Next Page
Loading...
