Teltonika TRB145 Recovery Guide

https://wiki.teltonika-networks.com/view/TRB145_Device_Recovery_Options
TRB145 Device Recovery Options
Main Page > TRB Gateways > TRB145 > TRB145 Manual > TRB145 Device Recovery Options
Contents
1 Summary
2 Default login information
2.1 Devices with random password
3 Factory reset
3.1 Reset Button
3.2 WebUI
3.3 Command line
4 RMA
Summary
This chapter is an overview on various recovery options for a TRB145 device.
Default login information
Using recovery methods resets the device's configuration to its default state. Therefore, you will
need to use the default authentication info in order to login to the device. The default login
information for TRB145 is provided below:
Default Address (LAN IP): 192.168.2.1
Default Username: admin
Default Password: admin01 or random generated password*
Devices with random password
* Certain devices or batches of a device may have a generated password out of the box, instead of
admin01. For TRB145 devices, batch from when unique passwords are used is 38
You can find the batch of your device on the Product Labels sticker.
Factory reset
A factory reset returns the device back to its default factory settings, i.e., it deletes all custom
configurations. Below you will find various methods of performing a factory reset on TRB145.
Additional note: SIM PIN on the main SIM card is the only user parameter that is kept after a
factory reset.

Teltonika TRB145 Specifications

General

Module type	Digital & analog
Channel type	-
Product color	Green
Signal direction	Input/output
Channels quantity	- channels
Serial interface type	RS-485
Supported network protocols	SSH, CLI, NAT, DDNS, OpenVPN
Linux operating systems supported	Yes
DC input voltage	9 - 30 V
Processor frequency	1200 MHz
Flash memory	512 MB
RAM capacity	128 MB
Maximum internal memory	- GB
USB version	2.0
USB ports quantity	1
Storage temperature (T-T)	-45 - 80 °C
Operating temperature (T-T)	-40 - 75 °C

Weight and Dimensions

Depth	60 mm
Width	70 mm
Height	18 mm
Weight	30 g