Temperature alert TM-ZP200

Need help?

Do you have a question about the Temperature alert TM-ZP200 and is the answer not in the manual?

Summary

About ZPoint

How it Works

Explains how ZPoint nodes monitor sensors and transmit data via cellular gateway to the cloud.

Hardware Guide

Setting Up the Hardware

Instructions for powering on the ZPoint Gateway and Nodes for initial setup.

Verifying Wireless Signal Reception

Setting Up Your First Alert

Step-by-step guide to configuring temperature alert notifications via the Sensor Cloud website.

Temperature@lert ZPoint Nodes in Detail

ZPoint Jacks and Connectors

Hardware Operation

Turning on the Node

Turning off the Node

Signal Strength Indicator Mode on the Node

How to use a special mode to check wireless signal strength and interpret the lights.

Operating Guidelines

Wireless Reception

Changing the Batteries

Step-by-step instructions on how to replace the batteries in a ZPoint Node.

Troubleshooting

Common Problems

Addresses common issues like flashing lights and low signal strength.

Failure Light is Flashing

Guidance on troubleshooting when the failure light is flashing, suggesting signal check.

Warning Light is Flashing

Explains what a flashing warning light means and potential causes like low battery or signal.

Specifications

Obtaining Service and Support