What’s in each box:
BaseStation
• TMP-B409 BaseStation
• Power Cord
• Omni-directional Whip antenna
• 3.5mm to 3.5mm 3 conductor data pairing cable
» Used to pair a BaseStation to the BeltStation(s)
• USB-A to USB-B cable
» Used to update BaseStation rmware
• USB-A to Mini-USB
» Used to update BeltStation rmware
• BaseSync cable
» Used if you have more than one BaseStation
» Improves RF performance when using multiple systems
• CD with manual, T-Desk software
BeltStation
• TMP-R409 BeltStation
• Li-Poly rechargeable battery
• 5VDC wall charger with Mini-USB connector
Remote Transceiver (optional)
• TMP-RT09 Remote Transceiver
• RJ-45 to RJ-45 CAT-5 cable
• Omni-directional Whip antenna
• Mounting Plate and screws
5 Bay Battery Charger (optional)
• TMA-BCHRG-05A Battery Charger
• AC Cable
Note: Charge ALL BeltStation batteries prior to set-up.
What else you may need:
• Headset, one for each user; may be dynamic or electret
microphone, with a 4-PIN XLR female connector
• 3-PIN XLR cables to connect to external 2-Wire Intercom system
• RJ-45 cables to connect to external 4-Wire Intercom system
• RJ-45 cable to connect to PC for T-Desk LAN control
Tempest900
4-Channel Quick Start Guide
1
Quick Start Guide
To Next Page
Need help?
General
