Figure 2
Dimensions
2Sfl0
TOP_IEW _ S11/16
[+70.1]
16"/8.11
[6/O,O]
,, 251/8_
NOTES:
1. Doors may vary by model.
2. Minimum return-air openings at furnace, based on metal duct. If flex duct is used,
see flex duct manufacturer's recommendations for equivalent diameters.
a. For 800 CFM-16-in. (406 mm) roundor 14 112x 12-in. (368 x 305 mm) rectangle.
b. For 1200 CFM-20-in. (508 mm) round or 14 112x 19 1/2-in. (368 x 495 mm) rectangle.
c, For 1600 CFM-22-in. (559 mm) round or 14 112x 22 1/16-in. (368 x 560mm) rectangle.
d. Return air above 1800 CFM at 0.5 in+w,c+ESP on 24,5" casing, requires one of the following
configurations: 2 sides, 1 side and a bottom or bottom only. See Air Delivery table in this
document for specific use to allow for sufficient airflow to the furnace.
3. Vent and Combustion air pipes through blower compartment must
use accessory "Vent Kit- Through the Cabinet". See accessory list for
current part number.
;,4]
OUTL='_W_DTH
_IR FLOW
[17.5] BOTTOM RETURN [17.5]
WIDTH
NOTE: ALL DIMEN_ONS IN INCH [MM]
' [ i _77/_ i
114 , _6_
_.o]1$1/ls
IZ_.Sl
pso.5]
I_ve.ll
_26s_e _
[_,_
_7,4]
15sS.Sl
NR_OW
S [4_a]
_S_N
¢laS
_" [1o1111 I.O_:IN
¢711
r_ER_rAT ENTRy
_rrOM rNt_
SD5060-4 Rev F
(F/G)9MXT
FURNACE SIZE
0401410
0401714
0601412
0601714
0801716
0802120
1002120
1202422
(F/G)9MXE
FURNACE SIZE
0401410
0401714
0601412
0601714
0801716
0802120
1002120
1202422
A
CABINET WIDTH
B
OUTLET WIDTH AIR INTAKE
14-3/16 (361) 12-1/2 (319) 7-1/8 (181)
17-1/2 (445) 15-7/8 (403) 8-3/4 (222)
14-3/16 (361) 12-1/2 (319) 7-1/8 (181)
17-1/2 (445) 15-7/8 (403) 8-3/4 (222)
17-1/2 (445) 15-7/8 (403) 8-3/4 (222)
21 (533) 19-3/8 (492) 10-1/2 (267)
21 (533) 19-3/8 (492) 10-1/2 (267)
24-1/2 (622) 22-7/8 (581) 12-1/4 (311)
A B D
OUTLET WIDTHCABINET WIDTH
C
BOTTOM
IN LET WIDTH
12-9/16 (322)
16 (406)
12-9/16 (322)
16 (406)
16 (406)
19-1/2 (495)
19-1/2 (495)
23 (584)
C
BOTTOM
IN LET WIDTH
12-9/16 (322)
16 (406)
12-9/16 (322)
16 (406)
16 (406)
19-1/2 (495)
19-1/2 (495)
23 (584)
AIR INTAKE
14-3/16 (361) 12-1/2 (319) 7-1/8 (181)
17-1/2 (445) 15-7/8 (403) 8-3/4 (222)
14-3/16 (361) 12-1/2 (319) 7-1/8 (181)
17-1/2 (445) 15-7/8 (403) 8-3/4 (222)
17-1/2 (445) 15-7/8 (403) 8-3/4 (222)
21 (533) 19-3/8 (492) 10-1/2 (267)
21 (533) 19-3/8 (492) 10-1/2 (267)
24-1/2 (622) 22-7/8 (581) 12-1/4 (311)
SHIP WT.
LB (KG)
125 (56)
135 (61)
136 (62)
146 (66)
156 (70)
161 (73)
171 (77)
195 (88)
SHIP WT.
LB (KG)
120 (54)
131 (59)
131 (59)
141 (63)
151 (68)
156 (71)
166 (75)
190 (85)
6 Specifications subject to change without notice. 440 01 4001 08
To Next Page
Loading...
