Tempur-Pedic TEMPUR-Ergo Extend Smart Base User Manual

7
Remote Control arrives paired to the adjustable base. Three (3) AAA batteries are required to operate
the remote.
remote control
MASSAGE
Head Zone Massage Control
Activates simple steady-state massage and toggles
through 2 intensity levels. Low, high and o.
Foot Zone Massage Control
Activates simple steady-state massage and toggles
through 2 intensity levels. Low, high and o.
Massage Wave Mode Control
Turns on and activates programmed massage
mode. Toggles wave modes 1, 2 ,3 and o. Intensity
default to low.
There are 3 possible wave massage modes and 2 intensity levels to
choose from. Press the Wave Massage Mode Selector to choose the
desired mode (1,2,or 3), then use the Head Massage and/or the Foot
Massage buttons to cycle through the available intensity levels. Once the
massage mode is chosen, it will run for 30 minutes unless it is cancelled
by pressing the Wave Massage Mode Selector button repeatedly until
massage stops.
If one of the wave massage modes is not needed, pressing Head and/or
Foot Massage buttons will initiate massage for those sections and cycle
through 2 different intensity levels as well as "OFF".
ADJUST
Head Position Adjustments
Use to raise and lower the head section of your
adjustable base.
Foot Position Adjustments
Use to raise and lower the foot section of your
adjustable base.
IMPORTANT!: For your safety, read the owner’s manual
carefully and completely before operating this product.
Electric shock may occur if electrical components are not
installed or operated according to these guidelines.

Tempur-Pedic TEMPUR-Ergo Extend Smart Base Specifications

General

Brand	Tempur-Pedic
Model	TEMPUR-Ergo Extend Smart Base
Category	Personal Care Products
Language	English