III Features & Configurations | Tenda
Tip
① 1M=128KByte/s.
② The volume of uplink traffic/downlink traffic should not be larger than that
allowed on your device's WAN (Internet) port. Consult your ISP, if you are
not sure of the total volume of Internet traffic that you can have.
③ The bandwidth for ADSL/DSL line usually refers to the download bandwidth.
4.6 Client Filter (Available only in 4G600)
This section allows you to set the times specific clients can or cannot access
the Internet via the devices’ IP addresses and service port. Note that this
feature is unavailable in 3G/4G Router Mode.
To Next Page
Loading...
