EasyManuals Logo

Tenda 5G03 User Manual

Tenda 5G03
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
III. (Optional) Extend your
network
Tips
− Currently, 5G03 can be used as the primary node to network with
devices that support the EASYMESH R2 protocol.
− Please ensure that the new device you want to add has never been
used. If not, reset it first.
Power on the router and connect it to the internet properly.
Place the new device in an elevated and open position within
3 meters from your router and power it on.
Press the MESH button of the router for about 1 to 3 seconds.
The LED indicator blinks fast. Within 2 minutes, press the
MESH/WPS button of the new device for 1 to 3 seconds to
negotiate with this router.
When the LED indicator of the router blinks slowly for 10
seconds and then lights solid on, the networking is successful
and the new device becomes a secondary node in the
network.
Refer to the following relocation tips to locate the new device
to a proper position:
• Ensure that the distance between any two nodes is within
their coverage range.
• Keep your nodes away from electronics with strong
interference, such as microwave ovens, induction cookers,
and refrigerators.
• Place the nodes in a high position with few obstacles.
- 5 -
1.
2.
3.
4.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Tenda 5G03 and is the answer not in the manual?

Tenda 5G03 Specifications

General IconGeneral
DSL WANNo
Ethernet WANYes
Device typeCellular network router
Product colorBlack
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet LAN interface typeGigabit Ethernet
Wi-Fi standards802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac), Wi-Fi 6 (802.11ax)
WLAN data transfer rates supported574, 1200 Mbit/s
4G standardLTE-TDD & LTE-FDD
3G standardsWCDMA
Data network3G, 4G, 5G
SIM card typeNanoSIM
3G bands supported850, 900, 2100 MHz
Ethernet LAN (RJ-45) ports1
Processor frequency2 GHz
Antenna typeInternal
Antennas quantity10
Security algorithmsWEP, WPA, WPA-PSK, WPA2, WPA2-PSK, WPA3
Storage temperature (T-T)-30 - 70 °C
Operating temperature (T-T)0 - 40 °C
Storage relative humidity (H-H)5 - 90 %
Operating relative humidity (H-H)10 - 90 %
Sustainability certificatesRoHS
Cables includedLAN (RJ-45)

Related product manuals