Web management
➊
Connect the computer to the switch or router that is connected to the
NVR.
➋
Set the IP address of the computer to an unused one belonging to the
same network segment as the IP address of the NVR but different from
the IP address of the NVR.
The default login IP address of the NVR is 192.168.1.254, please set the
IP address of the computer to192.168.1.X (X indicates 2 to 253, and is
unused by other devices).
These series of NVRs can be managed on the web UI.
Activate
If the NVR is not activated, you can activate it through the web UI. When the
activation is completed, you need to log in again.
101168192
255 255 255 0
To Next Page
Loading...
