Log in to web UI
Tips
The NVR supports HTTPS login. When you access its web UI, the browser may prompt that
the web address is not secure, just ignore it and continue.
Tips
The NVR supports HTTPS login. When you access its web UI, the browser may prompt that
the web address is not secure, just ignore it and continue.
➌
Launch a web browser on the computer, and visit the IP address of the
NVR (default: 192.168.1.254). Set Password, enter your Email Address,
and click Activate.
➋
Launch a web browser and visit the IP address of the NVR. Enter the
Login User Name and Login Password, and then click Login.
➊
Refer to the steps ➊ to ➋ in the Activate section to connect to the
computer and set its IP address.
By default, the DHCP function of the NVR is enabled. If there is a DHCP
server in the network, the IP address of the NVR may be changed. Please
refer to the actual IP address assigned to the NVR by the DHCP server.
Settings completed. You can enter the web UI of the NVR to preview
real-time video or configure the NVR as required.
8 to 32 characters
Re-enter the login password
Only for resetting the password
User Name
Device Activation
Password
Confirm Password
Email Address
English
Activate
admin
滶滾滷澳滶滻滽澳滶澳滷滺滹
To Next Page
Loading...
