Align the SATA connector of the HDD with the SATA slot on the
motherboard of the NVR, and then insert the HDD into the slot until it is
tightly fixed.
Take out the remaining screws from the NVR installation package, and
screw them into the HDD screw holes to fix the HDD.
Mounting the cover with the previously removed screws.
➍
➌
➎
HDD
HDD
POWER
POWER PoE PORTS LAN AUDIO HDMI
OUT
1 3
2 4
VGA USB1 USB2
IN
To Next Page
Loading...
