2 Install the camera
Fix the camera
Tips
The camera supports wall and pendant mounting. The mounting bracket
of wall mounting is included in the package. If you want to install the
camera by pendant mounting, please purchase the bracket by yourself.
The wall mounting is taken as an example here.
❸
❺ ❻
Marker pen
Swing bracket
M6*6mm machine screw
Horizontal adjustment screw
M6*25mm self-tapping screw
Anchor
Vertically adjust
Horizontally adjust
Horizontal adjustment screw
Vertical adjustment
screw
❶
❷
❹
Unfasten the horizontal adjustment screw on
the bottom, rotate the swing bracket to a
suitable angle, and then fasten the screw.
Install the camera (Running the cable
through the wall is taken as an example)
Adjust the monitoring direction and fix the
camera
− Please make sure the wall or the ceiling is strong enough to withstand three times the weight of
the camera.
− You may need to prepare a hammer drill, a drill bit, a rubber hammer, a screwdriver, and a
ladder for the installation.
To Next Page
Loading...
