Tenda MX3 - Page 5

Connect the node
I
02
English
1. Power off your modem.
2. Use the included Ethernet cable to connect the WAN/LAN port to your modem or the Ethernet jack.
3. Power on your modem.
4. Power on the node, and wait until the LED indicator blinks green.
Tips
If you do not use a modem for internet access, please skip steps 1 and 3.
Scenario1: Set up as your first nova node
MESH PWRLANWAN/LAN
RST
Power outlet
or
Ethernet jack
Modem (such as
optical modem)
Gigabit port
Ethernet cable
Internet