Need help?Do you have a question about the Tenda OS3 and is the answer not in the manual?
General| DSL WAN | No |
|---|---|
| Ethernet WAN | Yes |
| Wi-Fi band | Single-band (2.4 GHz) |
| Wi-Fi standards | 802.11a, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac) |
| Top Wi-Fi standard | Wi-Fi 5 (802.11ac) |
| WLAN data transfer rate (max) | 867 Mbit/s |
| VPN support | PPTP L2TP |
| Receiver sensitivity | 11a 6Mbps -92dBm±1.5dBm 11n MCS7 HT20 -72dBm±1.5dBm 11ac MCS9 HT80 -64dBm±1.5dBm |
| Ethernet LAN data rates | 10, 100 Mbit/s |
| Ethernet LAN interface type | Gigabit Ethernet |
| USB port | - |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Ethernet LAN (RJ-45) ports | 4 |
| Antenna gain level (max) | 12 dBi |
| Output current | 1 A |
| Output voltage | 12 V |
| Power source type | DC, PoE |
| Placement | Pole, Wall |
| Product type | Portable router |
| Product color | White |
| International Protection (IP) code | IP65 |
| Storage temperature (T-T) | -40 - 70 °C |
| Operating temperature (T-T) | -30 - 60 °C |
| Operating relative humidity (H-H) | 10 - 90 % |
| Security algorithms | 64-bit WEP, 128-bit WEP, WPA, WPA-PSK, WPA2, WPA2-PSK |
| Service Set Identifier (SSID) features | Hidden SSID |
| Channel bandwidth | 80 MHz |
| Networking standards | IEEE 802.11a, IEEE 802.11ac, IEEE 802.11n |
| Virtual LAN features | SSID-based VLAN assignment |
Weight and Dimensions| Depth | 109 mm |
|---|---|
| Width | 193 mm |
| Height | 61 mm |
Defines LED1, LED2, LED3 meanings for signal strength.
Explains RESET button function and usage for factory settings.
Step-by-step guide for automatic peer-to-peer bridging.
Instructions for setting up one-to-many CPE bridging.
Guide for manually configuring CPE bridging, including AP and Client modes.
Details connecting CPEs in AP (transmitting) and Client (receiving) modes.
To Next Page
