150Mbps Wireless PCI Adapter User Guide
WEP：Supports 10/26-bit Hex characters and 5/13-bit ASCII.
WPA-PSK：Supports 8-63-bit ASCII and 8-64 Hex characters.
WPA2-PSK：Supports 8-63-bit ASCII and 8-64 Hex characters.
WPA-PSK/WPA2-PSK：Supports 8-63-bit ASCII and 8-64 hex
characters.
Note:
1. The Hex characters consist of numbers 0~9 and letters a~f.
2. ASCII characters consist of any numbers/letters and characters.
1 Configure AP Mode
1）First input the SSID which you can easily identify in the basic
settings and keep other information unchanged.
2 ） Select “WPA-PSK”in the drop-down menu of authentication
To Next Page
Loading...