150Mbps Wireless PCI Adapter User Guide
Appendix How to Set WPS Ⅲ
WPS setting supports PBC and PIN code modes. The setting steps
will be introduced in detail. (The following connections take
Tenda W311R Wireless Router for example.)
1. PBC mode
There are two ways of enabling PBC on Wireless router (please
refer to the user guide of your wireless router).
1.1 Use WPS button on the router
Keep pressing the WPS button for one second if your Router (such
as Tenda W311R) provides WPS button. The WPS indicator will
keep flashing (for about 2 minutes). It indicates that the WPS
function is enabled.
Scan the router’ SSID on the WPS configuration interface of the
adapter’ UI and click “PBC” button to connect.
To Next Page
Loading...