Need help?Do you have a question about the Tenergy TB6AC+80W and is the answer not in the manual?
General| Brand | Tenergy |
|---|---|
| Model | TB6AC+80W |
| Category | Battery Charger |
| Language | English |
Highlights advancements like increased charge current, higher balance current, and 15 extra functions.
Details operating voltage range, circuit power, current limits, battery cell counts, weight, and dimensions.
Features automatic current adjustment, malfunction detection, and two-way linkage for safety.
Employs an individual-cell-voltage balancer, eliminating the need for an external unit.
Supports various lithium battery types including Li-ion, LiPo, and LiFe series.
Identifies input power cable, LCD screen, output charge lead, and balance lead sockets.
Critical warnings for correct battery connection to prevent charger damage and fire hazards.
Essential safety guidelines covering unattended operation, environment, input voltage, and battery compatibility.
Lists battery types and conditions that must not be charged or discharged to prevent hazards.
Visual guide to program selection, parameter adjustment, and process flow for different battery types.
Settings for LiPo, LiIo, LiFe: check time, waste time, sensitivity, and temperature cut-off.
Settings for NiMH/NiCd: sensitivity, peak detection, and temperature cut-off.
Configuration of safety timer, capacity cut-off, input power monitoring, and audible alerts.
Method for calculating safety timer for NiCd/NiMH based on capacity, current, and a divisor.
Explanation of Lithium battery program, constant voltage/current methods, and parameter setting.
Procedure for standard and balance charging lithium batteries, including cell count verification.
Diagrams for cell connection and details on fast charging lithium batteries.
Function for charging/discharging batteries for storage, setting them to a specific voltage state.
Guidelines for discharging lithium batteries, including voltage limits, balancing, and error monitoring.
Procedures for charging and discharging NiCd/NiMH batteries using auto/manual modes.
Setting up charge/discharge cycles for NiCd/NiMH batteries: balancing, refreshing, break-in.
Program for charging Pb batteries, noting current restrictions and manufacturer guidelines.
Steps for charging Pb batteries, setting charge current and nominal voltage.
Steps for discharging Pb batteries, setting discharge current and nominal voltage.
Function to automatically store and recall up to 20 operation data profiles, enabling customization.
How to inquire and display user settings, cell voltages, and other real-time information on the LCD.
Program to measure battery pack and per-cell internal resistance for lithium batteries.
Function to check lithium battery capacity and verify cell balancing status.
Procedure for balancing 2-6S Lixx batteries using the integrated balancer, showing individual cell voltages.
Utilizing the charger as a DC power supply with adjustable voltage and current settings.
Function for breaking-in and testing brushed motors with variable voltage and run time.
Using the charger as a convenient power supply for hot wire foam cutters.
Checking ESC/Motor PPM signals, measuring brushless motor RPM, and checking servos.
Program to calculate propeller thrust by setting motor RPM and propeller size.
Measuring external temperature and DC voltage of objects.
Measuring radio signals between TR (Transmitter) and RX (Receiver).
List of common charger error messages and their explanations for diagnosing issues.
Details the 12-month warranty period, required documentation, and customer service contact.
To Next Page
