Need help?Do you have a question about the Tenergy TB6B and is the answer not in the manual?
General| Brand | Tenergy |
|---|---|
| Model | TB6B |
| Category | Battery Charger |
| Language | English |
Overview of the product and manual reading importance.
Details the technical specifications of the TB6B charger.
Highlights the main functionalities and benefits of the TB6B charger.
Auto current/cell count setting for safety and error prevention.
Built-in cell voltage balancer for Li-ion/LiPo/LiFe batteries.
Monitors and balances individual cells during discharge.
Supports Li-ion, LiPo, LiFe, NiCd, NiMH, and Pb battery types.
Stores data for up to 5 battery types for repeatable charging.
Performs 1-5 cycles of charge/discharge for battery refreshing.
Durable aluminum case for efficient heat dissipation.
Guides users through the operation and settings of the charger.
Navigating the charger's main menu and program selection.
Setting initial parameters like battery type and cell count, with warnings.
Adjusting check time for accurate cell count detection for Li-ion batteries.
Delta Peak voltage for NiMH/NiCd charge termination settings.
Setting temperature cut-off for optional thermometer.
Setting cooling period between charge/discharge cycles.
Using a backup alarm to prevent overcharging.
Safety feature to prevent overcharging by setting a maximum charge amount.
Enabling/disabling button sounds and alarm sounds.
Setting input voltage threshold below which charging stops.
Detailed instructions for operating with Lithium batteries.
For individual batteries or packs without balance port/cell count.
For 2-6 cell Lithium batteries with balance port.
For rapid charging, reducing charge time.
For long-term storage, keeping batteries at 40% capacity.
Allows discharge of over 90% of Lithium batteries.
Verifying the charger-detected cell count against the user-selected count.
Checking safety settings and individual cell voltages during charging.
Instructions for operating with NiMH and NiCd batteries.
Options for 'AUT' or 'MAN' charge current settings.
Recommended discharge voltages for NiMH and NiCd.
For new or long-term NI batteries; performs cycles.
Instructions for operating with Pb (Lead Acid) batteries.
Setting charge current and verifying battery voltage for Pb batteries.
Setting discharge current and final voltage for Pb batteries.
Managing stored battery data for quick setup.
Storing battery parameters into memory slots.
Retrieving previously saved battery parameters.
Lists common warnings and error codes with their meanings.
Covers reverse polarity, connection breaks, and short circuits.
Includes input voltage errors, incorrect voltage selection, and cell voltage issues.
Addresses break down, temperature over, and control failure.
Important safety tips to prolong charger life and ensure proper operation.
Li-Po/Li-ion/LiFe balance charge warning and general battery type selection.
Ventilation, temperature, handling, and environment precautions.
Restrictions on battery types, children, and supervision.
Information regarding the product's 12-month warranty period and terms.
To Next Page
