Tennant 3530 - User Manual

Questions and Answers

S
Shaun EdwardsAug 11, 2025
Why my Tennant Vacuum Cleaner does not run?
- A
  Alexis ScottAug 11, 2025
  If your Tennant Vacuum Cleaner isn't running, there are several potential causes. First, ensure the ON/OFF switch is in the ON position. Check that the vacuum is properly plugged into the wall outlet. Also, the building circuit breaker might have tripped; try resetting it and using a different power circuit. In case of overheating, look for any air obstructions and allow the motor to cool down for 20 minutes.
C
Cameron NicholsAug 22, 2025
What to do if my Tennant 3530 has no suction?
- A
  Amanda JonesAug 22, 2025
  If your Tennant Vacuum Cleaner has little or no suction, begin by checking for a clogged hose and clear it if necessary. Inspect the hose for any holes and replace it if needed. Also, ensure the intake elbow in the lid isn't clogged; remove the hose and clear any obstructions. Verify that the drain hose knob is tightened and the lid is securely latched. Check if the recovery tank or bag is full and empty it if needed. Confirm that the drain valve is closed and the drain hose elbow is securely connected to the plug. Finally, inspect all gaskets and replace them if they are worn and leaking air.
R
Robert MatthewsAug 31, 2025
How to fix poor squeegee pick up on Tennant 3530 Vacuum Cleaner?
- J
  John RamirezAug 31, 2025
  If the squeegee on your Tennant Vacuum Cleaner isn't picking up properly, start by wiping off the squeegee blades to remove any debris. If the blades are worn, replace them. Make sure the squeegee blade is not loose by tightening the thumbscrews. Finally, check that the vacuum hose connection on the squeegee mount is securely attached.