Need help?Do you have a question about the Tentacle Sync TRACK E and is the answer not in the manual?
The Tentacle Setup App allows operation, synchronization, and parameter settings for TRACK E devices.
Ensure Bluetooth is active on your mobile device and grant necessary app permissions for communication.
Instructions for switching on the TRACK E and observing the status LED for power indication.
Guide on adding new TRACK E audio recorders and SYNC E timecode generators to the Tentacle Setup App.
Using the microphone input to jam-sync TRACK E with an external timecode source via cable.
Start and stop recordings for all TRACK E devices simultaneously via the app.
Start and stop recording for a specific TRACK E device via the app monitoring list.
Operate TRACK E devices directly and independently using the user switch.
Explanation of the 'Devices have to be synchronized' warning message and troubleshooting.
Options to choose app theme and select audio monitoring modes (loudspeaker/earpiece).
Safe Mode setting and function to remove all added devices from the list.
Accessing help, viewing acknowledgements, and checking the app version.
Configuration for device icon, status, timecode display, battery level, and recording format.
Details on earpiece/loudspeaker monitoring, level meter, recording time, and waveform display.
Settings for recording gain, low cut filter, and mic plugin power for optimal audio.
Controls for skipping files, speed adjustment, stop/play, and viewing file details.
Changing device name and selecting between 32-bit float and 24-bit recording formats.
Adjusting headphone output volume and LED brightness, and deactivating LEDs during recording.
Assigning functions to the user switch and formatting the microSD card.
Viewing firmware/app versions, hardware details, and understanding the limiter function.
Instructions for powering the TRACK E on and off using the user switch.
Steps to start and stop audio recording using the user switch.
Details on the included lavalier microphone and compatibility with various microphone types.
Information on the 3.5mm jack input, screw lock, and 5V plug-in power settings.
Guidance on using adapters for connecting a wider range of microphones.
Connecting headphones for monitoring while recording and during playback.
Information about the included 16GB microSD card, its capacity, formatting, and recommended types.
How battery level is indicated, low battery behavior, and temperature impact on charging.
Steps for connecting the TRACK E as a card reader, transferring files, and safely ejecting.
Prerequisites for update: backup, battery level, and closing related software.
Step-by-step guide to download, install, and complete the firmware update.
Important notes on app versions, Android support, connection stability, and troubleshooting update failures.
Details on sampling rate, bit-depth, file formats, storage, mic input, USB connection, and performance metrics.
Information on Bluetooth, synchronization, low cut filter, limiter, and gain range.
Specs for timecode input, frame rates, power source, battery capacity, weight, and dimensions.
Guidelines on proper device usage, warnings about water, heat, and handling.
FCC and Industry Canada compliance statements and warnings.
Formal declaration of product compliance with relevant EU directives.
Details for technical support, website, email, and phone number.
What the warranty covers (defects) and what it excludes (wear, misuse, repairs).
Prerequisites and steps for making a warranty claim, including proof of purchase.
General| Battery Life | Up to 10 hours |
|---|---|
| Channels | 1 |
| Sample Rate | 48 kHz |
| Phantom Power | No |
| Timecode | Yes |
| Timecode Output | 3.5mm TRS |
| Syncing Method | Bluetooth |
| Storage | microSD card |
| Connectivity | Bluetooth |
| Power Source | Rechargeable Li-ion battery |
| Operating Temperature | 0°C to 50°C |
| Type | Audio Recorder with Timecode |
To Next Page