Tentacle ◀▶ BNC:
To send timecode to your camera or recorder
with a BNC TC IN. The BNC cable is bidirectional
and enables you to sync your Tentacle to
an external timecode source as well such as
Canon 300, Zoom F8/N
Tentacle ▶ LEMO:
Straight 5-pin Lemo cable to send timecode to
a device with a TC IN such as Sound Devices
recorders or ARRI Alexa cameras
LEMO ▶ Tentacle:
5-pin Lemo cable to send timecode from your
a device with a Lemo TC OUT connector (e.g.
Sound Device) to a Tentacle
Tentacle ▶ XLR: To send timecode to a device
without a TC input, but with XLR audio input
connector such as Sony FS7, FS5, Zoom H4N
Tentacle/Mic Y-Cable ▶ Mini Jack:
To send timecode and audio of an external
microphone to a device with a 3.5 mm
microphone input eg. DSLR cameras
19
To Next Page
Loading...