Need help?Do you have a question about the Tentacle Sync E and is the answer not in the manual?
General| Brand | Tentacle |
|---|---|
| Model | Sync E |
| Category | Portable Generator |
| Language | English |
Covers overview, input/output, status LED, charging indicators, and power functions.
Introduces wireless and wired synchronization via Bluetooth and cable.
Explains TC-IN and Microphone-IN connection types.
Details the two primary operating modes: Red Mode and Green Mode.
Instructions for downloading and using the Tentacle Setup App.
Steps to enable Bluetooth on your mobile device for app connectivity.
Procedure for adding a new Tentacle device to the app's monitoring list.
Detailed steps for wirelessly synchronizing multiple Tentacle SYNC Es via Bluetooth.
How to designate one Tentacle as a master unit to sync other devices wirelessly.
Method for synchronizing Tentacle units using a physical 3.5mm cable connection.
How to view status information of Tentacle devices in the app's monitoring list.
Instructions on how to remove a Tentacle from the app's monitoring list.
Explains common warning signs in the app and their troubleshooting guidance.
Explains how the timecode display indicates the Tentacle's synchronization status.
How to set custom timecode or sync with phone time.
How to change the device icon and name for better identification.
How to change device name and set output volume (LINE/MIC/AUTO).
How to select the appropriate project frame rate for the Tentacle.
Setting auto power off and viewing general device information like firmware and serial number.
How to embed additional information into the timecode signal using user bits.
Connecting Tentacles to devices with dedicated timecode inputs for metadata recording.
Connecting Tentacles to devices via microphone input, recording timecode as audio.
Overview of adapter cables for connecting Tentacles to different recording devices.
Details on included sync cable, RED camera cable, and BNC/LEMO/XLR options.
Covers BNC, LEMO, XLR, and Y-cable connections for Tentacles.
Instructions for using the clamp to secure cables to the Tentacle.
Information about the built-in battery, charging, and operating time.
Details on the device's built-in microphone for reference sound recording.
Guide on how to update the Tentacle's firmware using the setup application.
Details on the firmware update process, including bootloader mode and driver installation.
Specifies the intended use of the device and operational restrictions.
Provides safety precautions for operating and maintaining the device.
Information on proper disposal of the device according to WEEE guidelines.
Compliance statement regarding FCC rules and regulations.
Compliance statement regarding Industry Canada regulations.
Official declaration of product compliance with relevant EU directives.
To Next Page