TENTCO Extension 4 - User Manual

To Next Page

DOUBLE BOW

EXTENSION

Congratulations on your purchase of this quality Tentco product. This extension is designed to connect

two Senior Bow tents (3m x 3m) to create extra space.

Tent & Frame assembly

1. Erect the 2 senior bowtents and position them about 2,3m apart with doors facing each other.

2. Assemble extension frame by matching the coloured coded corners to the coloured coded poles

inserting only the top half of the legs.

3. Pull the extension over the frame into position.

4. Now lift the frame and insert the bottom half of the legs one side at a time.

5. Pull the extension over the top of the bow tents and hook the legs onto the rope on the frame of the bow tent.

6. Fasten the extension to the frame and the bow tent frame with the velcro straps.

7. When everything is positioned correctly secure at all anchor points using the straight pegs.

8. Secure the guy ropes on the extension using the anchor pegs.

9. See list of do’s and dont’s and care instructions overleaf for more useful information.

J hooks

Anchor points

Guy ropes

Anchor points

J hooks

Go to to view instructional videos on how to erect your tentwww.tentco.co.za

Need help?

Do you have a question about the TENTCO Extension 4 and is the answer not in the manual?

Summary

Erect two senior bow tents and position them 2.3m apart with doors facing each other.

Assemble the extension frame by matching coloured coded corners to the coloured coded poles.

Pull the extension canvas over the frame and insert the bottom half of the legs.

Fasten the extension with velcro straps and secure all anchor points and guy ropes.

General

Material	Howard Safari Ripstop Canvas (260gsm)
Water Resistance	Waterproof
UV Protection	Yes
Color	Khaki
Poles Material	Steel
Setup Time	15 minutes