ADD-A-ROOM
ADD-A-ROOM
1. The add-a-room is already attached to the main tent with the zip at the end of the tent.
2. The telescopic pole goes between the 2 horizontal poles1 on the main tent and
1 on the add-a-room.
3. Once the tent frame is up clip the 2 x 1,2m aluminium poles to the horizontal pole
at the front of the add-a-room.
4. Tension the 2 guy ropes on the horizontal pole and the flysheet guyropes.
Zip to attach
add a room
Telescopic aluminium pole
with clinch fittings, under flysheet
Alum. poles with
clinch fittings at end
Guy ropes
Flysheet
Extra stabilising
guyrope points
Alum. pole with
clinch fittings at end
To Previous Page
