Fitting Strap to the Ratchet
With the Ratchet strap attached to the
D-rings, it can now be connected to the
tree straps. Once attached, check the
overall position of the Stingray and that it is
centrally aligned to each anchor point.
14, Give a strong pull before
cranking the Ratchet.
13, Lift the tent off the ground
by pulling through excess
strap at each point.
11, Feed the tree strap end
through the spindle.
10, Ensuring there’s enough
length, bring the Ratchet
and tree strap together.
12, Feed it in and pull it
through making sure it
does not twist.
13 14
To Next Page
Loading...
