5.5 Switch among Master Speakerphone, Slave Speakerphone
and Single Speakerphone, and Bluetooth Instruction
Master
Speakerphone-Slave
Speakerphone-Single
Speakerphone
This kit consists of 2 single speakerphones. Each of
the 2 speakerphones can be used independently.
In cascading mode, the one that connected to comp-
uter or other audio and video terminals is defined as
master speakerphone.
In cascading mode, the one that not connected to c-
omputer or other audio and video terminals, but con-
nected to the other end of the 3.5mm audio cable,
is defined as slave speakerphone.
Master speakerphone and slave speakerphone can
be switched. The one connected to audio source is
called master speakerphone, and the other one is c-
alled slave speakerphone. Either the master speak-
erphone or the slave speakerphone can be used in-
dependently (When not in cascading mode, the 2 s-
peakerphones of this kit can be used independently).
1.Press the Bluetooth button to turn on/off the Bluet-
ooth connection;
In cascading mode, short press the Bluetooth button
to turn on/off the Bluetooth connection (when the m-
aster speakerphone connected to computer via USB,
and the Bluetooth connection turned on at the same
time, then the USB communication will stop automa-
tically; when the master speakerphone connected to
computer via Bluetooth and via USB for power char-
ging, when Bluetooth connection disconnects, then
the USB connection will be adopted automatically).
2. Long press the Bluetooth button for 10s, then Blu-
etooth pairing will be cleared .
Single Speakerphone
Master Speakerphone
Slave Speakerphone
6
Bluetooth Connection
To Next Page
Loading...