Need help?Do you have a question about the tepeo ZEB-40R and is the answer not in the manual?
Provides essential guidance for the safe installation and operation of the ZEB® boiler.
Explains hazard symbols (Danger, Warning, Caution, Notice) used throughout the manual.
Defines the necessary qualifications and training for individuals installing or servicing the ZEB®.
Details adherence to UKCA marking standards and relevant safety laws for installation.
Specifies the designed purpose of the ZEB® as a wet central heating system boiler.
Outlines essential clearances around the unit to prevent hazards and ensure proper function.
Covers safe handling, lifting, and installation practices to prevent injury and damage.
Details critical electrical safety measures, including earthing and RCD protection.
Addresses system pressure, the need for pressure relief valves, and safe water handling.
Ensures safety is maintained after the ZEB® has been installed.
Provides safety instructions for performing maintenance and repairs on the ZEB®.
Explains the ZEB® as an electric dry core storage boiler for central heating.
Details the available ZEB® models (ZEB-40R, ZEB-40S) and their features.
Presents key technical data including output, pressure, electrical, and dimensions.
Illustrates user interfaces, wiring, and hydraulic layouts for installation and understanding.
Lists accessory items available to enhance the functionality of the ZEB®.
Specifies the dedicated electrical supply, MCB, RCD, and earthing requirements.
Details mounting and connection requirements for the communication box (Ethernet/WiFi).
Covers pressure relief valves, isolation valves, magnetic filters, and bypass valves.
Guides on selecting the optimal location, floor loading, and necessary clearances.
Covers final checks of location, pipework, cabling, and manoeuvring the unit.
Details the process of connecting the ZEB® to the electrical supply and safety checks.
Explains how to wire the communications box for Ethernet, thermostat, and pump.
Guides on connecting the primary system pipework, ensuring correct flow and return.
Instructions for downloading and using the tepeoPRO app for ZEB® setup.
Steps for system filling, bleeding, testing functionality, and verifying performance.
Guidance on confirming installation completion and helping users set up their app.
Details how to switch the ZEB® boiler on and off using the isolator switch.
Explains the meaning of LED lights on the Comms box for status indication.
Guides on using the app to monitor performance, change settings, and manage the ZEB®.
Instructions on how to safely remove the front panel for maintenance or inspection.
Provides guidance on cleaning the external surfaces of the ZEB® boiler.
Information on how to dispose of the ZEB® and its packaging responsibly.
To Next Page
General