EasyManua.ls Logo

tepro SILVERADO - Assembly; Preparation; Assembling the Grill

tepro SILVERADO
22 pages
Go to English
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
18
Assembling the Grill
Assembly
Preparation
Danger
Danger
Danger
Required tools
1 x Phillips screwdriver
Unpacking
4
3
5
6
2
2
1
2
P1401554-TEPRO_01397_Silverado-Feuerstelle_Grill_20140804.indd 8 4/8/14 10:58 AM
Injury hazard!
Failure to follow these instruc-
tions may lead to problems
and risks while using the grill.
Follow all of the assembly instructions
listed here.
1. First read through the entire assembly
instructions.
2. Allow yourself enough time for assem-
bly and find an even working space of
two to three square meters.
3. Small parts such as handles will
probably be pre-assembled.
4. Please mind the sharp edges of sheet
metal parts and wear protective gloves
while assembling the device.
Risk to children!
While playing, children can
become caught in the packag-
ing film and choke.
Do not let children play with the
packaging films.
Make sure that children do not put any
small assembly parts into their mouths.
They could swallow the parts and
choke on them.
Unpack the device and check whether
it is complete.
Risk of being cut!
Sheet metal parts may have
sharp edges. Proceed careful-
ly during the assembly.
Attach support legs (2) to fire bucket (1)
using bolts (A) and washers (B).
Place support structure (6) and fire
bowl (5) in the fire bucket.
Place cooking grate (3) on the fire
bucket.
Important: All bolts must be fastened
tight.