Do you have a question about the Teracue DMM-Series and is the answer not in the manual?
Protocols | RTP |
---|---|
Video Inputs | HDMI |
Video Outputs | HDMI (depending on model) |
Audio Inputs | Embedded SDI/HDMI, Analog Audio (depending on model) |
Audio Outputs | Embedded SDI/HDMI, Analog Audio (depending on model) |
Management | SNMP |
Input Interfaces | SDI, HDMI, Analog Audio |
Output Interfaces | SDI, HDMI, Analog Audio |
Video Codecs | H.264, H.265 |
Audio Codecs | AAC |
Supported Standards | SMPTE ST 2110, SMPTE ST 2022-6, AES67 |
Power Supply | 100-240V AC, 50-60Hz |
Operating Temperature | 0°C to 40°C |
Overview of the DMM-Series product characteristics and capabilities.
Highlights the primary features and functionalities of the DMM-Series.
Details the specifications and design of the DMM-100 main chassis.
Describes the DMM-100 CU handheld programmer unit for system configuration.
Technical overview and features of the DMM-140 Series module.
Technical overview and features of the DMM-150 Series module.
Explains control and navigation for the DMM-150 Series using its display and keypad.
Details control and navigation for the DMM-140 Series via its display and keypad.
Web interface for DMM-150 status monitoring and input configuration.
Configuring decoder functions and output streams for DMM-150.
Configuring IP output, including general IP and IPTV modes for DMM-150.
Web interface settings for DMM-150 IP input configuration.
Configuring system, device, version, and network for DMM-150.
Web interface for DMM-140 status monitoring and input configuration.
Configuring decoder functions and output streams for DMM-140.
Configuring IP output, including general IP and IPTV modes for DMM-140.
Web interface settings for DMM-140 IP input configuration.
Configuring system, device, version, and network for DMM-140.
Detailed technical specifications for the DMM-140 Series modules.
Detailed technical specifications for the DMM-150 Series modules.
Guidelines for assessing the quality of satellite input signals (Strength, C/N, Eb/N0, BER).
Declaration of conformity to relevant European standards for DMM-140 series.
Declaration of conformity to relevant European standards for DMM-150 series.
Declaration of conformity to relevant European standards for DMM-220 series.