8
Making the Connection – Direct to Host
If the PCoIP Remote Workstation Card IP address is known (see KB 15134-
1348 for details) or its default IP address is used, you can choose Direct
to Host as the session connection type to ensure the PCoIP Zero Client
connects directly to the specified workstation card.
1. From the zero client OSD, click Options > Configuration > Session.
2. Click Unlock, enter the requested credentials, and then click OK.
3. Change the connection type to Direct to Host.
4. Enter the workstation card’s IP address in the DNS Name
or IP Address field.
5. Click OK.
6. Click Reset.
7. When the Connect button appears, click Connect.
3. Click Connect.
The SLP discovery process starts, and the message “Discovering
hosts, please wait…” displays. When discovery completes, the IP
and MAC addresses of any discovered workstation cards are listed on
the screen.
4. Locate your new card by its MAC address and then select it.
5. Click Connect.
Once connected, the display shows the host PC screen. The
zero client’s session LED on the front panel turns green, indicating
a successful PCoIP connection.
ESTABLISHING A PCOIP CONNECTION (Continued)
To Next Page
Loading...