10
ADDITIONAL SOFTWARE TOOLS
Teradici PCoIP Host Software Driver (recommended and are required if
workstation cards are brokered).
Features include:
• No mouse pointer lag on higher latency networks (over 50 ms)
• User experience controls, connection information, and statistics
• In-session key sequence support to disconnect without using zero
client button
Teradici PCoIP Management Console
• Manage configuration and firmware updates for large deployments
of PCoIP Remote Workation Cards and PCoIP Zero Clients.
SNMP Monitor
• PCoIP Remote Workstation Cards and PCoIP Zero Clients support
the SNMP protocol. You can use an SNMP tool to capture important
read-only information such as bitrates, frame rates, and Mpps.
RESOURCES
•
T
eradici Support Site - help.teradici.com
• PCoIP® Remote Workstation Card Firmware Administrators'
Guide
• Session Planning Guide
PCoIP Knowledge Base:
• KB 1231: “Wh
at are the jumpers on the Tera2 host card used for?”
• KB 1025: “Dual-link DVI, Single-link DVI, DisplayPort and 2560x1600
resolutions with PCoIP products.”
• KB 1360: “How to find the PCoIP Remote Workstation Card IP
address.”
• PCoIP Community Forum – communities.teradici.com
To Next Page
Loading...