EasyManua.ls Logo

Terex Genie GS-1932 XH User Manual

Terex Genie GS-1932 XH
107 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Operator's Manual
Serial Number Range
GS
-
1530/32
from GS30P
-
200101
from GS32P-200101
from GS46P-200101
ANSI/CSA
North America
South America
Asia
GS
-
1930/32
from GS30D-40101
from GS32D-10101
from GS46D-20101
GS
-
1932 XH
GS
-
2
032
GS
-
2
632
with
Maintenance
Information
GS
-
3232
GS
-
2
04
6
GS
-
2
64
6
GS
-
2
646 XH
GS
-
324
6
Original Instructions
Eighth Edition
Second Printing
Part No. 1296776GT
GS™
-
3246 XH
GS™-4046

Other manuals for Terex Genie GS-1932 XH

Question and Answer IconNeed help?

Do you have a question about the Terex Genie GS-1932 XH and is the answer not in the manual?

Terex Genie GS-1932 XH Specifications

General IconGeneral
BrandTerex
ModelGenie GS-1932 XH
CategoryScissor Lifts
LanguageEnglish

Summary

Introduction to Genie Operation

Intended Use and Familiarization Guide

Machine is for lifting personnel, tools, and materials to aerial work sites.

Understanding Hazard Classifications

Critical Danger Warnings

Failure to obey instructions results in death or serious injury.

Symbol and Hazard Pictorial Definitions

General Safety Precautions

Tip-over Hazard and Tilt Alarm Warning

Warning about tip-over hazard and tilt alarm.

Electrocution Hazard Warning

Warning about electrocution hazard from electrical lines.

Capacity and Side Force Limits

Information on max capacity and side force for specific models.

Work Area Safety Procedures

Electrocution Hazards and Clearance

Maintaining safe clearance from electrical power lines.

Tip-over Hazard Prevention

Guidelines on platform capacity and occupant limits.

Crushing Hazard Awareness

Keep hands clear of moving parts and pinch points.

Operating on Slopes Safely

Guidelines for operating the machine on slopes.

Fall Hazard Prevention

Safety measures for guard rail systems and fall protection.

Collision Hazard Avoidance

Precautions to prevent collisions during operation.

Bodily Injury and Fire Hazards

Warnings on hydraulic leaks, battery hazards, and component damage.

Machine Control Panel Operations

Pre-Operation Inspections and Tests

Pre-operation Inspection Checklist

Comprehensive checklist of items to inspect on the machine.

Workplace Hazard Inspection Checklist

Checklist of hazardous situations to avoid in the work area.

Operating Instructions for Genie Lifts

Conditions for Safe Machine Operation

Conditions that must be met before operating the machine.

Drive Speed Selection and Slope Operation

Selecting drive speed and guidelines for operating on slopes.

Transport and Lifting Instructions

General Securement and Lifting Recommendations

Key safety recommendations for transport and lifting procedures.

Securing Machine for Transit

Instructions on how to properly secure the machine to a transport vehicle.

Lifting with a Forklift

Steps for safely lifting the machine using a forklift.

Machine Maintenance Procedures

Machine Specifications

Related product manuals