Operator's Manual First Edition • First Printing
28 T180 • T240 Part No. 140435
Transport Instructions
Observe and Obey:
Terex Corporation provides this securement
information as a recommendation. Drivers are
solely responsible for making sure that the
generator set is properly secured and the
correct trailer is selected pursuant to US
Department of Transportation regulations, other
localized regulations and company policy.
Terex customers needing to containerize any
Terex product should source a qualified freight
forwarder with expertise in preparing, loading
and securing Terex equipment for international
shipment.
The transport vehicle must be parked on a level
surface.
The transport vehicle must be secured to
prevent rolling while the equipment is being
loaded.
Be sure the vehicle capacity, loading surfaces
and chains or straps are sufficient to withstand
the unit weight. See Specifications section for
unit weight.
Securing to truck or trailer for
transit
1 Close, latch and lock all doors.
2 Level the unit.
3 Inspect the entire machine for loose and
unsecured items.
4 Place a chock on both sides of each axle
behind the wheels. Use the four tie-down points
on the machine for anchoring down to the
transport surface.
5 Use chain or straps of ample load capacity.
6 Adjust the rigging to prevent damage to the
chains.
To Next Page
