To Next PageTo Next Page
Need help?Do you have a question about the Terhi Tender and is the answer not in the manual?
Consider weather, boat size, equipment, and skill for safe operation.
How to empty rain water using a bailer or hand pump; avoid tipping.
Explains how the boat drains rainwater, even with the plug open.
Check bottom drain plug is closed before setting out; bilge plugs on specific models.
Do not overload, distribute loads evenly, wear life jackets, always remain seated.
Warns about limited stability and risk of capsizing/swamping for specific models.
Check fuel level for trip and carry reserve fuel for emergencies.
Check steering, electrical equipment, and engine daily. Check seaworthiness.
Lists essential safety equipment like life jackets, bailing device, anchor, and lights.
Ensure all onboard items are stowed securely, especially in rough seas.
Check charts cover the entire area when boating in unfamiliar waters.
Inform crew of tasks, check mooring lines do not tangle with propeller.
Explains the meaning of WARNING and NOTE symbols for safety and damage avoidance.
Terhi boats are inspected and certified according to EU directive 2013/53/EU.
Describes the rigid sandwich construction using ABS plastic and foam for unsinkability.
Explains ABS plastic composition, impact strength, flexibility, UV protection, and water absorption.
Details the four-year warranty for materials and manufacturing flaws.
Boat insurance may cover damage during water, transport, or storage.
Explains registration requirements for boats with engines over 15 kW and local regulations.
Technical specifications are found on the manufacturer's type plate and in the handbook.
Advices careful mooring even in sheltered anchorages; boat designed to drain rainwater.
Recommends roller/hose slipways for stony beaches; how to pull onto soft soil.
Installation instructions are included; steering system must be CE-certified.
Required for boats with engines over 25 kW; must be serviced annually.
Discusses trim angle, load distribution, engine trim, and safe driving practices.
Familiarize with engine operation, follow manufacturer's instructions for installation and winter storage.
Explains the function and use of the emergency switch with a lanyard for safety.
Refuel at quay/shore, wipe spills, stop engine before refueling.
Location and operation of the bilge pump; check regularly for blockages.
Instructions for attaching accessories, using plywood supports and sealing adhesive.
Safest to sit on designated seats; describes how to re-embark the boat using the swimming ladder.
Location and function of the main electrical isolator switch for powering on/off and cutting current.
Details battery placement for various Terhi models and secure mounting instructions.
Description of control panels for specific Terhi models with images.
Provides detailed wiring diagrams for various Terhi boat models.
Location and types of fuses used; instructions for changing fuses.
Lists models with readiness for navigation lights and notes on installation.
Guidance on cleaning the boat to maintain comfort, safety, and resale value.
Best practices for storing the boat during winter, including location and support.
Instructions for winter storage and servicing of the engine and other onboard equipment.
Information on using anti-fouling paints for boats used in the sea to prevent vegetation.
Advice on general care, maintenance, and keeping the hull and propeller clean.
Information on warranty repairs, engine repairs, and using Terhi Fix repair compound.
Guidance on safely transporting the boat on a trailer, including checks and securing.
Instructions for towing other boats, including rope selection and careful movements.
Steps for safely launching and recovering the boat onto its trailer, including precautions.
Details general setup, dimensions, capacities, and design categories (C and D) for the boats.
Lists essential safety and design requirements and their corresponding ISO standards.
Outlines the four-year warranty, exclusions, and conditions for validity.
General