TERMET ECOCONDENS CRYSTAL 100

Need help?

Do you have a question about the TERMET ECOCONDENS CRYSTAL 100 and is the answer not in the manual?

Summary

BOILER INSTALLATION PROCEDURES

3.1. Installation Requirements and Regulations

Covers essential rules for installation concerning gas, water, flue, room, and electrical systems.

3.2. Preliminary Check Activities

Lists crucial checks to perform before starting the boiler installation process.

3.3. Boiler Mounting and Installation

Details the physical steps for mounting and installing the boiler unit.

3.4. Gas and Water System Connections

Guides on correctly connecting the boiler to the gas and water heating systems.

3.5. Flue Gas Outlet and Condensate Drainage

Covers installation of flue gas systems and condensate outlets.

3.6. Connecting Additional Devices

BOILER ADJUSTMENT, SETTINGS, AND STARTUP

4.2. Gas Type and CO2 Adjustment

Process for adapting the boiler to different gas types and regulating CO2 levels.

4.3. Power and Parameter Settings

Adjusting heating/DHW power and configuring controller parameters.

5.1. Initial Boiler Startup

Step-by-step guide for the first commissioning and startup of the boiler.

5.2. Operating Modes and Settings

5.3. Boiler Diagnosis and Error Handling

Information on diagnosing issues, understanding error codes, and troubleshooting.

MAINTENANCE, SERVICE, AND COMPONENT DATA

6.1. Inspection and Maintenance Overview

6.1.1. Preparing Boiler for Service

6.1.2. Combustion System Maintenance

CASCADE SYSTEM OPERATION

7.1. Autodetection for Cascade Setup

7.2. Cascade Operation Modes

7.3. Cascade Operation Algorithm