Need help?Do you have a question about the TERMET TERMAQ Series and is the answer not in the manual?
Essential safety and usage guidelines for gas appliances, installation, and maintenance.
Describes safety features like flue gas outflow protection and heat exchanger overheating protection.
Covers crucial rules for installing the water heater, including ventilation and flue systems.
Details the process and components for connecting the gas supply line, including filters and valves.
Explains how to connect the water heater to the water supply system, emphasizing filter use.
Guides the connection of the water heater to the chimney duct, specifying material and diameter.
Procedures for turning on the water heater, including gas ignition sequence and tap operation.
How to adjust water temperature and flow rate using control knobs for optimal comfort.
Details checks for safety mechanisms like flue gas outflow and overheating protection.
Specific test procedure to verify the correct operation of the flue gas outflow limiter.
Specific test procedure to verify the correct operation of the heat exchanger overheating limiter.
Outlines the stages of burner ignition and potential issues during this process.
Provides steps and measurements to diagnose and correct ignition system faults.
General| Type | Gas Water Heater |
|---|---|
| Ignition | Electronic Ignition |
| Power Consumption | 65W |
| Gas Type | Natural Gas / LPG |
| Power Supply | 230V / 50Hz |
| Safety Features | Flame Failure Device, Overheat Protection |
| Protection | IPX4 |
| Material | Stainless Steel Heat Exchanger |
| Thermostat | Electronic Thermostat with Temperature Control |
To Next Page
