Termozeta komodo - Charging the Battery; Vacuuming Liquids

CHARGING THE BATTERY
Before using the vacuum cleaner for the rst time, we recommend
letting it charge for at least 7 consecutive hours.
For recharging, use only the charger provided.
• Fasten the charging base (D) to the wall
• Plug the charger into a power outlet.
• To begin charging, hook the vacuum cleaner on the charging base
(D) provided. The LED on the handle of the appliance will light up
indicating that charging is in progress.
• The time required for optimal charging is 7 hours. With a complete
charge, the device can operate for about 12-13 minutes.
• Based on your vacuuming needs, insert the brush tool (A) or crevice tool (B) in the
accessory coupling in (1).
• Press the on/off switch (5) to turn the appliance on and off.
• To vacuum in tight spaces attach the crevice tool (B).
• When nished vacuuming, we recommend emptying the container (2).
• Before vacuuming liquids, always empty and clean the container (2) and the lter (3)
inside it.
• Attach the liquid tool (C) on the coupling (1) of the container (2) and turn the appliance
on by pressing the on/off switch (5).
• When nished vacuuming, we recommend emptying the vacuumed liquid from the
container.
INSTRUCTIONS FOR USE
VACUUMING SOLIDS
VACUUMING LIQUIDS
Fig 1
Led
D
ENGLISH