9)
Timing Key:
In the case of power on, press the key to close timing; in the case of power off, press
the key to open timing.
Press the key, when the timing symbol flashes, press up and down key to select the
required timing value.
Timing values can be set in 1-24 hours and the timing value is adjusted up or down by
one hour.
10)
Sleep Mode: In the cooling Mode, Press the UP and Fan Key to turn on the sleep
mode, then the unit will work on Energy-Saving and quiet type.
2. Operation instructions of remote control
The remote-control Panel is as follows:
Instructions of key operation of the high-quality remote control are as follows:
1)
Power: Press the key to turn on or turn
off the machine.
2)
Timer: press the key to set timing.
3)
Down: press the key to
reduce
temperature and timing set value.
4)
Mode: press the key to switch between
cooling, fan, dehumidifying mode.
5)
Up: press the key to increase
temperature and timing set value.
6)
Fan: press the key to select high, low
wind speed.
7)
Sleep Mode: Press the key to turn on the
sleep mode.
Frost Protection Function:
In cooling, dehumidifying or economic power saving mode, if the temperature of the
exhaust pipe is too low, the machine will automatically enter protection status; if the
temperature of the exhaust pipe rises to a certain temperature, it can automatically revert
to normal operation.
To Next Page
