5
At this point you can close all open windows, the configuration is completed. You can now
go on with the next step of the installation.
Please note: To use the soundcard you have to go to step 2, without this, there is no
output on the Aureon 7.1 USB.
We now get to the final step, the installation of the control panel:
2.) For full functionality, please install the control panel, which you find in the start-up of
the included software CD. If that does not launch automatically, please run the „auto-
run.exe“ from the software CD.
After the successful installation of the control panel you have to restart your system.
Please follow the instructions of the installation routine.
To Previous Page
Loading...
