This guide shows you how to start up your NOXON device.

You can find detailed descriptions and special configurations in your

manual.

I. Pretest

Your NOXON is a network device that needs to be connected to your network

before you can get started. This takes just a few easy stepsall you need is some

basic information about your network.

A fast internet connection (for example, DSL, ideally with a flat rate).

A router, called a WLAN router, for wireless operation (wireless LAN).

A PC (just for updates and your digital music collection. You don't need a PC to

receive Internet radio).

Your network key ("WEP / WPA / WPA2").

This key, just like any key, protects your network from unauthorized access and

was generated when your network was set up. To allow NOXON access to a key-

protected network, you will need to enter the network key into NOXON in a later

step. Please ask your network specialist for the key.

If your network does not have a key, the NOXON can connect to the Internet

without a network key.

Note: If you are not sure whether or not you have a network key, try to connect

the NOXON to the Internet without one. If this does not work, repeat the setup

process from the beginning. However, you will need to know your network key at

this point.

What do you need?

Before you get started, here are the most important buttons on your remote:

Back and forward (or cancel and confirm/OK)

Character input (similar to the text navigation on cell phones)

Delete last character

Main directory (home button)

Configuration menu

The following pages show you how to set up your NOXON quickly and easily.

Have fun!

TerraTec NOXON - Quick Setup Guide Manual

Other manuals for TerraTec NOXON