TerraTec PHASE X24 fw User Manual

14 PHASE X24 (English)
Installing the GSIF driver
If you intend to use the GigaStudio sampler application, you will need to install the GSIF
driver. You can also access this installation routine via the autorun application of the
PHASE CD. If the autorun application on the CD does not launch automatically, start the
application manually by double-clicking “Autorun.exe” in the root folder of the CD.
Select your language, and “PHASE X24 FW” in the following menu. Click the “GSIF
Installation” button to start the setup wizard. Follow the on-screen instructions and click
“Next” to continue.
The PHASE X24 FW as a system audio device (Windows)
If you would like to use the PHASE X24 FW not only for specific audio applications, but as
your default Windows audio device, select the PHASE X24 FW audio driver in the Control
Panel under “Sounds and Audio Devices” > “Audio” as the default device for the desired
functions.
As the PHASE X24 FW is a professional audio interface, its levels can only be adjusted
using its included Control Panel. The Windows mixer is disabled to prevent it from
adversely affecting the signal quality.

TerraTec PHASE X24 fw Specifications

General

Brand	TerraTec
Model	PHASE X24 fw
Category	Stereo System
Language	English