Need help?Do you have a question about the Terratek TPMT15VBE and is the answer not in the manual?
General| Brand | Terratek |
|---|---|
| Model | TPMT15VBE |
| Category | Power Tool |
| Language | English |
Read all instructions to avoid electric shock, fire, or serious injury.
Keep work area clean, well-lit, and free from distractions. Do not use in explosive atmospheres.
Ensure outlet matches tool plug and voltage. Use grounded extension cords for outdoor use.
Never use under influence, stay alert, wear protection, keep clothing clear, ensure tool is off.
Keep tool clean, serviced, and disconnect from power before adjustments or servicing.
Use qualified repair agents with identical parts. Develop a maintenance schedule for safety.
Ensure guards are in place and remove keys. Wear proper apparel, non-slip footwear, and protective hair covering.
Secure workpiece with clamps or vise. Wear safety glasses; avoid using hands to hold work.
Maintain tools, disconnect before servicing, use recommended accessories.
Feed work correctly, avoid overreaching, and never stand on the tool.
Always wear eye protection and a dust mask for dusty applications.
Be aware of hidden wiring and utilities. Use detection tools or contact utility companies.
Hold tool firmly with both hands for control. Maintain proper footing and balance.
Carefully remove product and accessories. Ensure all items listed in the packing list are included.
The tool is switched ON by sliding the switch button forward, OFF by sliding backward.
Speed is controlled by a dial with six positions, 1 being lowest and 6 being highest.
Attachments are mounted to the spindle. Ensure secure tightening of the cap screw.
With the tool unplugged, mount the attachment securely in place before use.
Slide switch forward to turn on. Avoid contact with workpiece until full speed. Do not apply excessive pressure.
Turn off tool, wait for stop, unplug. Remove attachment, clean, and store in a safe location.
Inspect tool condition for loose screws, binding, damage, or wiring issues before each use.
Keep air vents clear, clean dust, lubricate parts, clean body with damp cloth.
Use only recommended accessories for safety. Other accessories may pose an injury risk.
Certifies conformity to CE, EMC, MD, and RoHS directives for product manufacturing.
Proper disposal of waste electrical products. Recycle where facilities exist.
To Next Page