Page
18 Executing a part programme 134
18.1 Simple 1D programme 135
18.2 Programme with angle, perpendicularity and 2D measurements 140
19 Statistics menu 150
20 Interfaces 156
20.1 RS 232 digital input 156
20.2 RS 232 digital output 157
20.3 CENTRONICS output and printer type (A4) 158
21 Printing formats 159
22 Exporting data files to PC 161
22.1 Data file format 162
23 Sales programme 162
24 Warranty 163
25 Declaration of conformity 164