Need help?Do you have a question about the TESA TESA-Rugosurf 20 and is the answer not in the manual?
General| Brand | TESA |
|---|---|
| Model | TESA-Rugosurf 20 |
| Category | Accessories |
| Language | English |
Explains how to select the measuring length and the number of cut-offs as per ISO 4287 standard.
Describes how to choose cut-offs when using the ISO 12085 (CNOMO) standard for measurements.
Details how to check and set the correct probe position for accurate measurements on various surfaces.
Guides on selecting, enabling/disabling roughness parameters and setting tolerance values.
Explains how to use the memory function to store measurement parameters and graphical representations.
Provides instructions for regularly calibrating the roughness gauge using a standard specimen.
Allows setting a delay between requesting a measurement and its actual start, useful for hard-to-reach locations.
Explains how to choose between metric and imperial units and select measurement standards like ISO 4287 or ISO 12085.
Describes the process for changing the display language of the roughness gauge.
Guides on how to set the date and time for the roughness gauge's internal clock.
Details how to navigate and view displayed parameters, graphs, and Abbott curves after measurement.
Describes how to send commands to retrieve specific parameter results via software.
To Next Page