Need help?Do you have a question about the Tescan Vega 3 Sem and is the answer not in the manual?
Outlines essential safety rules, electrical hazards, and forbidden operations for users.
Details procedures and conditions for safe transportation and storage of the microscope.
Describes the process and responsibilities for installing the microscope unit.
Provides step-by-step instructions for powering on and launching the software.
Guides users through the process of safely changing samples within the chamber.
Outlines steps for achieving high magnification images and optimizing resolution.
Provides instructions for safely shutting down the microscope and software.
Explains the procedure for replacing the tungsten filament, performed by trained users.
Details the specific startup sequence required after a filament replacement.
Describes manual adjustments to the electron gun for optimal beam alignment.
General| Type | Scanning Electron Microscope (SEM) |
|---|---|
| Vacuum Modes | High Vacuum, Low Vacuum |
| Resolution (High Vacuum) | 3.0 nm |
| Magnification | 1, 000, 000x |
| Detectors | Secondary Electron Detector |
| Stage Type | Motorized stage |
| Stage Movement | X, Y, Z, Rotation, Tilt |
| Vacuum System | Turbo molecular pump, Rotary pump |
To Next Page